TB Electric Moto Carbon Fiber Fender Set

The TB Electric Moto Carbon Fiber Fender Set is the premier bodywork upgrade for Sur-Ron electric dirt bikes, delivering authentic 3K pre-preg composite construction, significant weight savings, and a race-grade gloss finish. Replacing brittle factory polypropylene plastics that crack during tip-overs, these carbon fiber front and rear fenders offer extreme structural rigidity and impact resistance.

Manufactured from genuine 3K carbon fiber cloth cured under vacuum in high-pressure autoclaves, the TB Electric Moto fenders cut unsprung body weight by over 60% compared to stock plastics. High-mount weight reduction lowers the bike's center of gravity, improving handling agility and flickability during rapid directional changes.

A high-gloss, automotive-grade UV-resistant clear coat seals the carbon weave against moisture, chemical fading, and road salt, ensuring a deep glossy finish that will not yellow or haze over time. Precision CNC-trimmed mounting holes ensure direct bolt-on fitment using OEM hardware.

Structural Rigidity & Tire Clearance: Unlike soft factory front fenders that flex and flap against knobby tires at speed, the rigid carbon structure maintains positive tire clearance under heavy aerodynamic and vibration loads. The durable composite structure ensures that the fenders will not develop stress fractures even after seasons of hard off-road roost bombardment.

Care & Maintenance: Clean carbon fenders with mild automotive car soap and microfiber towels. Maintain the finish by applying synthetic wax or ceramic spray once per season, avoiding harsh solvent degreasers.

Frequently Asked Questions:

Q: Is this genuine carbon fiber or a vinyl print? A: All TB Electric Moto fenders are 100% genuine 3K pre-preg carbon fiber composite cured under vacuum and finished with an automotive UV clear coat.

Q: How much lighter are carbon fiber fenders compared to stock plastics? A: They reduce fender weight by approximately 60% while providing superior rigidity and impact strength.

Q: Do these fenders bolt directly into factory mounting holes? A: Yes. Pre-drilled mounting holes match OEM frame and fork crown locations for a direct bolt-on swap.

Q: How should I care for the carbon clear coat finish? A: Wash with standard automotive soap and protect with synthetic wax or ceramic detailer. Avoid abrasive scouring pads.

Q: Does the rear fender provide adequate mud protection? A: Yes. The rear fender profile matches factory dimensions to channel roost and water spray away from the rear shock and battery tray.

Resin Ratio Optimization & Impact Durability: TB Electric Moto carbon fenders are manufactured using aerospace-grade pre-impregnated carbon cloth with exact resin-to-fiber ratios. This high-density composite construction eliminates micro-fractures from flying rock roost, ensuring the fenders will not delaminate over seasons of hard riding.

Carbon Weave Protection & Finish Care: TB Electric Moto carbon fenders are finished with an automotive-grade clear coat that seals the 3K composite against road salt, mud, and chemical staining. Maintain the deep glossy finish by applying standard synthetic automotive wax or ceramic spray coating every few months, avoiding harsh solvent-based degreasers. The durable composite structure ensures that the fenders will not develop stress fractures or spider cracks even after seasons of hard off-road roost bombardment. Inspect mounting hardware regularly to prevent over-tightening.

Autoclave Vacuum Curing & Resin Consolidation: Curing the pre-preg carbon fiber in a pressurized autoclave eliminates microscopic voids and ensures optimal fiber-to-resin ratio, maximizing tensile stiffness and impact resistance against flying rock roost.