About GritShift
GritShift is an American off-road engineering company based in Florida that has established itself as the leading authority on chassis durability, structural protection, and rider ergonomics for electric dirt bikes. When the Sur-Ron Light Bee first arrived, aggressive riders quickly discovered that factory components—designed around lightweight urban and mild trail usage—had distinct structural vulnerabilities under hard off-road abuse. GritShift stepped in to engineer rugged, race-proven upgrades including aircraft-grade 7075-T6 footpeg braces, heavy-duty 6mm motor bash guards, oversized cockpit risers, and high-friction sintered brake pads.
The GritShift Story: Engineering Solutions for Real-World Riding
GritShift was founded by passionate off-road riders and engineers who pushed electric motorcycles to their absolute mechanical limits. Through rigorous testing in hard enduro rock gardens, deep sand, and motocross jumps, the GritShift team identified every structural weak point on the Sur-Ron chassis. The most notorious failure point on stock Light Bee frames is the cast aluminum footpeg mounting tabs. Under the weight of an adult rider landing jumps or hitting hidden obstacles, these thin factory tabs can bend or snap entirely off the frame casting, creating a dangerous loss of control and requiring expensive frame replacement. GritShift engineered the world-renowned Pro Peg Brace, CNC-machined from ultra-high-strength 7075-T6 billet aluminum, to tie both footpeg brackets together into a rigid, reinforced sub-structure. Beyond structural chassis reinforcement, GritShift expanded its catalog to address rider cockpit comfort, high-temperature braking performance, and protective bodywork. Today, GritShift is trusted by competitive e-moto racers and weekend trail warriors across the globe.
GritShift Products Available at Electric On Dirt Tracks
Our store features an extensive selection of GritShift precision upgrades designed to bulletproof your bike:
1. **GritShift Pro Peg Brace Kit (SKU: SR-GRI-0013)**: CNC-machined from 7075-T6 aluminum (the same alloy used in aircraft bulkheads), this cross-brace connects left and right footpeg mounts to distribute landing forces across the entire frame. 2. **GritShift 50mm Handlebar Riser Kit (SKU: SR-GRI-0014)**: Precision-machined 6061-T6 billet risers that raise the handlebar clamp height by 50mm, opening up the cramped stock cockpit for adult riders. 3. **GritShift Sintered Brake Pad Set Front & Rear (SKU: SR-GRI-0017)**: Copper-metallic sintered compound engineered to resist high-temperature brake fade during steep mountain descents and aggressive high-speed riding. 4. **GritShift Motor Bash Guard - Aluminum (SKU: SR-GRI-0022)**: Robust 6mm thick 6061-T6 aluminum plate providing wrap-around impact protection for the exposed motor casing and wiring harness. 5. **GritShift Custom Decal Kit - Neon Series (SKU: SR-GRI-0020)**: High-durability 3M automotive vinyl graphics with UV-resistant clear coat. 6. **GritShift Gripper Seat Cover - Pro Series (SKU: SR-GRI-0026)**: Marine-grade ribbed traction cover providing non-slip saddle grip in mud and wet weather.
How to Choose Your GritShift Upgrade Path
Every rider has unique priorities depending on their physical stature and riding style:
- **Mandatory Safety for Riders Over 160 lbs**: If you weigh over 160 lbs (73 kg) or jump your bike, the **Pro Peg Brace Kit** is an essential structural upgrade. It prevents catastrophic frame tab failure and stabilizes footpeg flex during hard standing sections. - **Ergonomic Relief for Riders Over 5'9"**: The stock Sur-Ron cockpit has a low handlebar height and aggressive forward lean designed for smaller riders. Installing the **50mm Handlebar Riser Kit** allows adult riders to stand in a balanced, neutral attack position without hunching or suffering lower back fatigue. - **Mountain & Downhill Trail Riders**: Stock resin brake pads glaze and lose stopping power quickly under heavy thermal load. The **Sintered Brake Pad Set** provides immediate bite and consistent friction even when rotors reach elevated temperatures. - **Rocky Enduro & Log-Hop Protection**: The **6mm Motor Bash Guard** is essential insurance against cracked motor housings when clearing logs, boulders, and rocky ledges.
Installation Advice & Hardware Standards
GritShift products are engineered for clean, direct bolt-on installation without cutting, welding, or drilling:
- **Peg Brace Torque**: When installing the Pro Peg Brace, always use the supplied Grade 8 metric hardware and torque all bolts evenly to 25–28 Nm using blue threadlocker. - **Brake Pad Bedding**: Sintered metallic pads require a proper heat bedding procedure. Perform 10–15 moderate stops from cruising speed down to walking pace without coming to a complete standstill, followed by 5 firm stops to transfer a uniform layer of friction material to the rotor surface. - **Cable Slack with 50mm Risers**: Check that your front brake line, throttle wire, and display cables have sufficient slack when turning the handlebars lock-to-lock before riding.
Frequently Asked Questions — GritShift
Q: Why is a footpeg brace considered necessary on the Sur-Ron Light Bee?
The factory footpeg mounts attach to relatively thin cast aluminum tabs on the lower frame. Hard landings, rider weight over 160 lbs, or clipping trail obstacles can bend or snap these tabs. The GritShift brace ties both mounts together to dissipate stress across the subframe.
Q: What is the difference between sintered brake pads and factory resin pads?
Sintered pads are manufactured from pressed copper and metallic particles. Unlike organic resin pads that fade, glaze, and rapidly wear out when hot, sintered pads maintain consistent friction and stopping power across extreme operating temperatures.
Q: Do I need extended cables to install the GritShift 50mm Handlebar Risers?
On most stock Light Bee X and Ultra Bee models, the factory brake hoses and wiring harnesses have enough service loop to accommodate the 50mm rise. Simply unclip the cables from the upper frame guides to reroute them with adequate slack.
Q: Can the GritShift Motor Bash Guard be installed alongside aftermarket full-length skid plates?
The 6mm aluminum motor bash guard directly mounts around the motor casing. If pairing with full-chassis underbelly skid plates, check mounting hole alignment and bracket clearances.